The Tybox 5000 is a non-programmable thermostat suitable for the management of one zone of heating via a Boiler or heat pump.
It allows the room temperature to be read & adjusted from 10 to 30 degrees (in increments of half a degree), using the + or - buttons or between modes (on/frost protection). The unit also indicates when it is calling for heat via the ON icon.
The unit takes 2 standard AAA batteries (provided), and will indicate when the battery level is low
The unit is surface mounted (new installation or in replacement of an existing thermostat), and the fascias can be interchanged to fit more appropriately to any taste – coloured thermostat covers sold separately
It can only be used in a single zone system - 240v input (only one tybox 5000 can be used per Tydom installation).
The Tybox 5000 can be connected to the Tydom 1.0/Home/Pro/Home/Pro for programming, local/remote control & voice control. Additionally, to enable further energy efficient features connect door (DO) & window sensors (MDO/DOI) – sold separately.
If you don’t have a Tydom 1.0/Home/Pro/Home/Pro, start with the smart thermostat starter pack (wired) - Tybox 5000 pack - 6050643
Contact output 2A (230V)
Ball test: 125 ° C
Rated surge voltage: 4000V
Powered by 2 lithium batteries 1.5 V, LR03/AAA (supplied)
Class III installation
Radio frequency 868.7 MHz to 869.2 MHz
Maximum wireless power: <10 mW
Receiver category: 2
Wireless remote control device
Wireless range: 100 to 300 metres outside, variable depending on the associated equipment (the range can vary depending on the installation conditions and the electromagnetic environment)
Dimensions: 80 x 84 x 21 mm
Degree of protection: IP 20
Storage temperature: -10 to +70°C
Operating temperature: 0 to +55°C
5 year warranty